Softside Heater - Click the picture for more details
4 year Warranty
Manufacturer does not recommend using this heater with a tube style softside.
Easy to read digital dial
Complete Control and Heater Pad
You will receive heater control and a heater pad with
this purchase.
Certified to UL approval
Heater Control and Heater Pad is included
FAQ's
- I have a wood frame waterbed can I use this heater?
NO, this heater is designed to be used with a softside waterbed with a depth
of 3-7 inches.
- Where do I put the heater pad on? The heater pad lays
directly on the wood or foam, underneath the safety liner.
- Where do I put the sensor? This is lays on the wood
or foam at least 12 inches away from the heater pad. Too close and the sensor
will pick up the heat from the pad and shut off prematurely.
- Should I drain my mattress to put the pad down or can
I just pull back the mattress and shove it underneath? You should ALWAYS
drain your mattress before installing the heater. The heater might fold on
itself if you try to shove it underneath. Pulling up of your mattress might
also damage the internal wave reduction system if you have one.
- Should I just use my heater in the winter time? A
mattress without a heater installed is quite cold. It will pull the heat from
your body. This is not safe nor is it healthy. We recommend the use of a heater
year round for two reasons. One, it's comfortable and two, it helps prolong
the life of the vinyl by keeping the temperature constant.
If you still have questions, feel free to call
us at 1-800-4MYREST
