Wood Frame Covers are designed to look
as if you have a regular mattress inside of your wood frame waterbed.
We offer you 3 choices. A good, better and best.
Essence Tight Top - A Wood Frame Mattress Cover that zips open but is
not detachable.
Essence Pillowtop - A Wood Frame Mattress Cover that has a detachable
zipper allowing you to remove the top panel without having to drain your waterbed
mattress. The cover is also reversible. Reversing the cover every 6 months
allows you to create even wear on the pillowtop resulting in a longer life
span for the cover. Since you're able to detach the cover and have it dry
cleaned, this eliminates the need to purchase a mattress pad.
Naples Pillow Top - Has all of the benefits of the Essense Pillowtop
but is slightly thicker in design with the addition of Summer Silk on one
side and Winter Wool on the othe. Both materials are sewn inside of the
cover so there is no possibility of any allergic reactions.
To install the cover - Drain your waterbed mattress. Leave the heater
and saftey liner in the same places. The heater can be felt through the
cover and will eliminate condensation that could develop if one isn't used.
The liner will protect the fabric on the sides of the cover from rubbing
against the frame and also in case of a leak. Lay the bottom portion of
the cover inside of the liner and then place your waterbed mattress inside
of the cover. After filling, zip closed the top cover. The cover will protect
the waterbed mattress from punctures.
Below are some examples of what the covers will look like inside of a
frame. The stitch patterns in the pictures might be different then the
actual product.
Tight Top
Pillow Top
Inside Frame Measurements
Super Single - 48x84 or 4ft x 7ft
Queen - 60x84 or 5ft x 7ft
Cal King - California King - King Waterbed - (All are the same) 72x84
or 6ft x 7ft
